I think you are not on the right channel on the Kinbus. Look if the lamps on the Kingbus are blinking when you drive without steering. The lamps must blink when you steer, not when you driving. This was my fault the first time i used the Kingbus. I changed the channels drive and steering and then i could programm the Kingpad.
I think you are not on the right channel on the Kinbus. Look if the lamps on the Kingbus are blinking when you drive without steering. The lamps must blink when you steer, not when you driving. This was my fault the first time i used the Kingbus. I changed the channels drive and steering and then i could programm the Kingpad.
ich bin scheinbar zu blöd den Kingbus zu programmieren. Also ich habe den das Kingpad an meinen Lenkkanal angelötet und die Verbindungen überprüft, dann habe ich Strom auf den Empfänger gegeben über eine Empfängerakku und den Kingbus über den Lenkkanal an den Empfänger angeschlossen, doch ich kann die Programmtaste drücke so lange ich will, der Kingbus blinkt nicht, egal wie lange ich drücke!!! Ich habe allerdings kein Strom auf den Kingbus gegeben, da ich davon ausgehe das das System über den "Steering In" Storm bekommt. Was mache ich da falsch, muss ich dem Kingbus zum Anlernen der Schalter( Kingpad's) doch Strom drauf geben???
mhm wenn ich deinen Worten folgen darf, heißt das "ja"??? Mhm nicht das des nur bei dem Versuch bleibt und mir der Kingbus dann abraucht, das wäre dann ein sehr teurer Versuch?!